User manual

©American DJ® - www.Americandj.com - Flat Par CWWW9 User Manual Page 11
©American DJ® - www.Americandj.com - Flat Par CWWW9 User Manual Page 12
Flat Par CWWW9 ADJ LED RC2 Operation
The ADJ LED RC2 infrared remote (sold seperately) has many dif-
ferent functions and gives you complete control of your Flat Par
CWWW9. To control the your desired fixture you must aim the con-
troller at the front of the fixture and be no more the 30 feet away. To
use the ADJ LED RC2 you must first activate the fixtures infrared re-
ceiver, to activate the receiver please see the instructions on page 9.
BLACKOUT - Pressing this button will blackout the fixture.
PROGRAM SELECTION - This button has 3 functions; Auto Run,
Display On/Off, and White presets. Each press of this button will
change to the next function. Note: To know what function you are
in, it is helpful to have a good view of the LED display.
• When the unit is in Auto Run you can adjust the speed of the Auto
Run. Press the speed button (this will put the unit into Fade Mode)
and use the “+” or “-” buttons to adjust the speed, the press the
Program Selection button to return to Auto Run. The Auto Run will
now run at the speed you set. When this mode is active, “AUTO” will
be seen on the LED display.
• When the unit is in Display On/Off mode, press the “+” or “-” but-
tons to switch the operating mode of the display. See LED Display
On/Off on page 8.
• When the unit is in White Presets mode, press the “+” or “-” buttons
to scroll through the different presets. When this mode is active, “6-
XX” will appear in the LED display.
FLASH - This button will activate the strobe effect. You can control
the flash rate by pressing the “+” and “-” buttons. Press this button
again to exit strobe mode.
SPEED - Pressing this button will activate Fade Mode. Press this
button and use the “+” & “-” buttons to adjust the speed of the Fade
Mode.
DMX MODE - This button will let you select which DMX mode you
want to use. Some fixtures will come with different DMX channel
modes. This button will switch between the different modes. Please
see pages 14-15 for DMX modes, values, and traits.
SL/SA (Slave or Sound Active) - This button lets you toggle be-
tween Slave mode and Sound Active mode.
• When the display reads “Slav”, it means that the unit is designated
as a slave in a Master-Slave configuration. See page 10 for Master-
Slave configuration.
• When the display reads “9-SO”, the unit is in Sound Active mode.
SET ADDRESS - Press this button to set the DMX address. Press
this button first, then press the numbers to set the address.
Example: Set DMX Address 1 Press “S-0-0-1”
Set DMX Address 245 Press “S-2-4-5”
R G B - These buttons are not functional with this unit.
W - When the “W” button is pressed Cool White will be activated.
After pressing either of these buttons press the “+” or “-” to adjust the
brightness.
A - When the “A” button is pressed Warm White will be activated.
After pressing either of these buttons press the “+” or “-” to adjust the
brightness.
“+” and “-” - Use these buttons to adjust the flash rate, speed of the
Fade Mode, and program selection.
DMX Control:
Operating through an DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX Mode and address.
1. Before connecting to an DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the “+” or “-” buttons to
scroll through the DMX Channel Modes. Set the mode before you
address the fixture. See the next page for the DMX modes.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the “S” (Set Addr) button. When the “S” button
is pressed the LED’s will flash 2-3 times. Use the number buttons to
press in your desired address. See “SET ADDRESS” on this page
for examples.
Note: When seeting the DMX address each time a number is pressed
a LED color will glow, when you have set the DMX address correctly
all LED’s will flash 2-3 times.
Flat Par CWWW9 ADJ LED RC2 Operation