User manual
ADJ Products, LLC - www.adj.com - Encore Prole 1000 Color User Manual Page 14
R G B W - Press either one of these buttons and the press the “+”
or “-” to adjust the brightness. Press the FLASH button to activate
strobing and use the “+” or “-” to adjust the flash speed.
“+” and “-” - These buttons adjust the flash rate and speed of the
color change mode, color fade mode, and auto run. When in color
change or color fade mode they are used to find your desired pro-
gram. See color change mode and color fade mode on page 8.
DMX Mode:
Operating through a DMX controller gives the user the freedom to
create their own programs tailored to their own individual needs.
Follow the directions below to set your DMX address and DMX chan-
nel mode.
1. Before connecting to a DMX controller, your fixture has different
DMX channel modes, please select your desired mode by press-
ing the DMX Mode button, then using the “+” or “-” buttons to
scroll through the DMX channel modes. Set the mode before you
address the fixture. See the bottom of this page for the different
DMX modes.
2. After you have selected your mode, set the DMX address for the
fixture by pressing the “S” button. When the “S” button is pressed
the LED’s will flash 2-3 times. Use the number buttons to press in
your desired address. See “SET ADDRESS” on page 13 for
examples.
Note: When seeting the DMX address each time a number is pressed
a LED color will flash, when you have set the DMX address correctly
all LED’s will flash 2-3 times.
3. Now you may connect the fixture via the XLR connections to any
standard DMX controller. Please see pages 16-22 to for a detailed
descriptions of the DMX modes, values, and traits.
• If the Red LED flashes you are in 4 Channel Mode.
• If the Green LED flashes you are in 5 Channel Mode.
• If the Blue LED flashes you are in 6 Channel Mode.
• If the White LED flashes you are in 10 Channel Mode.
• If the Red & Green LED’s flash you are in 11 Channel Mode.
Encore Profile 1000 Color ADJ LED RC2 Operation
ADJ Products, LLC - www.adj.com - Encore Prole 1000 Color User Manual Page 17
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 WHITE
0 - 255 0% - 100%
5 MASTER DIMMER
0 - 255 0% - 100%
6 SHUTTER/STROBE
0 - 15 LED OFF
16 - 255 STROBING SLOW - FAST
Encore Profile 1000 Color 6 Channel Mode