User manual

Encore Profile 1000 Color ADJ LED RC2 Operation
The ADJ LED RC2 infrared remote (sold seperately) has many dif-
fernet functions to control your Encore Profile 1000 Color. To control
the fixture you must aim the controller at the infrared sensor and be
no more the 30 feet away. To use the ADJ LED RC2 you must first
activate the fixtures infrared sensor, to activate the sensor please see
the instructions on pages 10-11.
BLACKOUT - Pressing this button will blackout the fixture.
SELECT PROG - Pressing this button will cycle through static color
mode, color change mode, color fade mode, and auto run mode.
Each press of this button will change to the next mode. When you
found your desired mode use the “+” or “-” to scroll through the pro-
grams or static colors. When in either color fade, or color change
mode, press the Speed button and use the “+” or “-” to adjust the
running speed. When in static color mode, press the Flash button to
activate strobe and use the “+” or “-” to adjust the strobe speed.
FLASH - This button will activate the strobe effect. You can control
the flash rate by pressing the “+” and “-” buttons. Press this button
again to exit strobe mode.
SPEED - Press this button and use the “+” & “-” buttons to adjust the
speed of the color change mode, color fade mode, and auto run.
DMX MODE - This button will cycle between DMX addressing, DMX
channel mode, and dimmer curve selection. Some fixtures will come
with different DMX channel modes. This button will switch between
the different modes. Please see pages 16-22 for DMX modes, values,
and traits.
SLAVE/SOUND ACTIVE - This designates the fixture as a slave fix-
ture in a master/slave configuration. Sound activity is invalid for this
fixture.
SET ADDRESS - Press this button to set the DMX address. Press
this button first, then press the numbers to set the address. If the
address is correctly set, all LED’s will flash and the unit will automati-
cally go into DMX mode.
Example: Set DMX Address 1 Press “S-0-0-1”
Set DMX Address 245 Press “S-2-4-5”
ADJ Products, LLC - www.adj.com - Encore Prole 1000 Color User Manual Page 13
ADJ Products, LLC - www.adj.com - Encore Prole 1000 Color User Manual Page 18
Encore Profile 1000 Color 10 Channel Mode
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 WHITE
0 - 255 0% - 100%
5 MASTER DIMMER
0 - 255 0% - 100%
6 SHUTTER/STROBE
0 - 15 LED OFF
16 - 255 STROBING SLOW - FAST
7 PROGRAM SELECTION MODE
0 - 51 DIMMING MODE
52 - 102 COLOR MACRO MODE
103 - 153 COLOR CHANGE MODE
154 - 204 COLOR FADE MODE
205 - 255 AUTO RUN MODE
8 COLOR MACROS/PROGRAMS/
AUTO RUN
0 - 255 COLOR MACRO MODE
(See page 23 for the Color Macro Chart)
COLOR CHANGE PROGRAMS
0 - 15 COLOR CHANGE 1
16 - 31 COLOR CHANGE 2
32 - 47 COLOR CHANGE 3
48 - 63 COLOR CHANGE 4
64 - 79 COLOR CHANGE 5
80 - 95 COLOR CHANGE 6
96 - 111 COLOR CHANGE 7
112 - 127 COLOR CHANGE 8
128 - 143 COLOR CHANGE 9
144 - 159 COLOR CHANGE 10
160 - 175 COLOR CHANGE 11
176 - 191 COLOR CHANGE 12