User manual

ADJ Products, LLC - www.adj.com - Encore Burst 100 IP User Manual Page 12
Encore Burst 100 IP System Menu
DMX Address
001-512
DMX CH Mode
Dim Modes
No DMX State Hold Last/Blackout/Manual
Gamma 1.0/2.0/2.2/2.4/2.6/2.8
Dimming Curve Modes
Dimming Speed
DMX Lost Status
DMX Channel Mode
Selection
DMX Addressing
Standard/Stage/TV/Architectural/Theatre/Stage2
Dim Speed 0.1S~10S
1Ch/2Ch/3Ch/4Ch
LED Refresh Rate
900Hz/1000Hz/1100Hz/1200Hz/1300Hz/
1400Hz/1500Hz/6000Hz/25000Hz
MENU OPTIONS DESCRIPTIONSUBMENU
Tungsten ON/OFF
Display
ON/OFF
Service Passcode = 50
Manual Control
WW LED 000 - 255
Strobe 000 - 255
Information
Fixture Life Time
Total LED Time
Fixture Temps
DMX Values
Software Version
WW LED 000 - 255
Strobe 000 - 255
X.X
ON/OFF
Backlight
Display Lock
Gamma Brightness
Eect Adjust (Calibration) - WW LED 000 - 255
Factory Restore - Password = 11
Tungsten Eect
Backlight Control
Factory Settings
Power On Time - XXXXXX Hours
P-On Time-R - XXXXXX Hours
P-On Time Reset - Password = 50
Current - XXX˚
Max Resettable - XXX˚
Max Not Resettable - XXX˚
Rst Temp History - Password = 50
Calibration
LED Refresh Setting
Manual Control
Total Running Time
(Not Resettable)
Total Running Time
(Resettable)
Reset Total Running Time
Current Software Version
Current DMX Values
Current Temperature
LED On Time - XXXXXX Hours
LED On Time-R - XXXXXX Hours
LED Time Reset - Password = 50
Total LED On Running
Time (Not Resettable)
LED On Running Time
(Resettable)
Reset LED Running Time
Maximum Temperature*
Reached (Resettable)
Reset Temperature
Display Control Lock
Maximum Temperature**
Reached (Not Resettable)
*Current Maximum Temperature - Maximum xture temp. that has been recorded, before reset and after reset.
**Maximum Temperature - Overall maximum xture temp. that has been recorded. (Not Resettable)