Manual

DELETE A STEP:
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous flashing light next to
‘PROG.’
2. Select the CHASE 1 TO 6 (FIG. 5) that contains the step you
would like to delete.
3. Press and release the TAP SYNC/DISPLAY (FIG.11)
.
4. After selecting the TAP SYNC/DISPLAY (FIG.11) use the UP and
DOWN BUTTONS, to manually scroll to the step you wish to
delete.
5. When you have reached the step you wish to delete, press and
release the AUTO/DEL (FIG.8).
DELETE A COMPLETE CHASE:
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous flashing light next to
‘PROG.’
2. Press and hold down the CHASE BUTTON (FIG.5) that you want
to delete.
3. While holding down the CHASE BUTTON (FIG.5) press and release
the AUTO/DEL BUTTON (FIG. 9).
4. Release the CHASE BUTTON (FIG.5). The chase should be
deleted.
DELETE ALL CHASES:
This function will allow you to clear all chase memory
(delete all chases).
1. Press and hold down the AUTO/DEL& BANKDOWN BUTTONS FIG.8
2. While holding down the AUTO/DEL & BANKDOWN BUTTONS FIG.8
disconnect the power.
3. Holding down the AUTO/DEL & BANKDOWN BUTTONS FIG.8
reconnect the power hold for 3 seconds LED’s blink all chase
memory should be erased.
Elation Professional® - DMX OPERATOR User Manual page 13
PLAYBACK SCENES & CHASES
MANUAL RUN SCENES:
1. When power is first turned on, the unit is in manual scene mode.
2. Make sure AUTO & MUSIC LED’S BUTTONS (FIGS. 8 AND 9) are off .
3. Select BANK (FIG.4), using the
UP and DOWN BANK BUTTONS
(FIG.4), that store the scenes you wish to run.
4. Press the SCENE BUTTONS (FIG.2) to run the scene you selected.
MANUAL RUN CHASES:
This function will allow you to manually step through all scenes in
any Chase.
1. Press the PROGRAM BUTTON (FIG. 6) for three (3) seconds to
activate program mode. The LCD DISPLAY (FIG.3) will indicate
program mode by displaying a continuous fast blinking dot next
to ‘PROG.’
2. Execute a chase by selecting one of the eight CHASE BUTTONS
(FIG.5).
5. Press the TAP/SYNC BUTTON (FIG.11)
.
6. Use the BANK BUTTONS (FIG.4) to scroll through the chase.
Note:Display will show the number of the step in the Chase not the
Scene bank or number
AUTO RUN SCENES:
This function will run a bank of programmed scenes in a sequential loop.
1. Press the AUTO/DEL (FIG.8) to activate Auto Mode. A flashing
light in the LCD DISPLAY (FIG.3) will indicate auto mode.
2. Use the
UP and DOWN BANK BUTTONS (FIG.4), to select a bank of
scenes to run.
3. After selecting the bank of scenes you want run, you can use the
SPEED (FIG.13) and FADE (FIG.12) sliders to adjust the scene chase
Note: you can change banks, to run different scene sequences, at any
time by pressing the
UP and DOWN BANK BUTTONS (FIG.4).
Note: when Adjusting fade time never make it slower than the Speed
setting or your scene will not be completed before a new step is sent.
Elation Professional® - DMX OPERATOR User Manual page 14