User manual

ADJ Products, LLC - www.adj.com - Inno Pocket Spot Instruction Manual Page 6
Screw one clamp via a M12 screw and nut to the included
bracket. Attach the bracket using the included screws to the
bottom of the Inno Pocket Spot. Attach the eyehole screw to
the bottom of the base and pull the safety-cable through the
screw and over the trussing system or a safe xation spot.
Insert the end in the carabine and tighten the safety screw.
NOTICE: The suitable enviromental temperature for this light-
ing xture is between -25˚ C to 45˚ C. Do not place this lighting
xture in an enviroment where the temperatures are under or
above the temperatures stated above. This will allow the xture
to run at its best and help prolong the xture life.
Inno Pocket Spot Mounting Inno Pocket Spot 9 Channel Mode
Channel Value Function
5 SHUTTER/STROBE
0 - 7 BLACKOUT
8 - 15 SHUTTER OPEN
16 - 131 STROBING SLOW - FAST
132 - 139 SHUTTER OPEN
140 - 181 SHUTTER SLOW OPEN - FAST CLOSE
182 - 189 SHUTTER OPEN
190 - 231 SHUTTER FAST OPEN - SLOW CLOSE
232 - 239 SHUTTER OPEN
240 - 247 RANDOM STROBE
248 - 255 SHUTTER OPEN
6 0 - 255 DIMMER 0% - 100%
7 0 - 255 MOVEMENT SPEED FAST - SLOW
8 FUNCTION
0 - 69 NO FUNCTION
70 - 79 BLACKOUT WITH PAN/TILT
80 - 89 NO FUNCTION
90 - 99 BLACKOUT WITH COLOR CHANGE
100 - 109 NO FUNCTION
110 - 119 BLACKOUT WITH GOBO CHANGE
120 - 199 NO FUNCTION
200 - 209 RESET ALL
210 - 249 NO FUNCTION
250 - 255 SOUND ACTIVE MODE
9 DIMMER CURVES
0 - 41 STANDARD
42 - 84 STAGE
85 - 127 TV
128 - 170 ARCHITECTURAL
171 - 213 THEATER
214 - 255 DEFAULT TO UNIT CURVE SETTING
ADJ Products, LLC - www.adj.com - Inno Pocket Spot Instruction Manual Page 21