User manual

ManualsBrandsADJ ManualsLight EffectsLED moving head spot Inno Pocket Spot

User Instructions

Rev. 3/14

INNO POCKET SPOT

Please Note: Specications and improvements in the design

of this unit and this manual are subject to change without any

prior written notice.

Inno Pocket Spot Specifications

Model: Inno Pocket Spot

Voltage: 100 - 240V, 50/60Hz

LED: 1 x 12W White LED

Power Consumption: 26W @ 120V

27W @ 230V

Dimensions: 6.25”(L) x 5.75”(W) x 10.5”(H)

159mm x 147mm x 265mm

Weight: 7 Lbs. / 3 kgs.

Beam Angle: 13 Degrees

Fuse: 2 Amp

Duty Cycle: None

DMX: 2 DMX Channel Modes: 9 Channel

Mode & 11 Channel Mode

Colors: 7 + White

Gobos: 7 + Spot

Sound Active: Yes

Working Position: Any Safe, Secure Position

Warranty: 2 Year (730 days)

ADJ Products, LLC

6122 S. Eastern Ave. Los Angeles, CA 90040 USA

Tel: 323-582-2650 / Fax: 323-725-6100

Web: www.adj.com / E-mail: info@americandj.com

A.D.J. Supply Europe B.V.

Junostraat 2

6468 EW Kerkrade

Netherlands

service@adjgroup.eu / www.adj.eu

Tel: +31 45 546 85 00 / Fax: +31 45 546 85 99

Auto Sensing Voltage: This xture contains a automatic volt-

age switch, which will auto sense the voltage when it is plugged

into the power source.

Summary of content (14 pages)

PAGE 1
Inno Pocket Spot Model: Specifications Inno Pocket Spot Voltage: 100 - 240V, 50/60Hz LED: 1 x 12W White LED Power Consumption: 26W @ 120V 27W @ 230V Dimensions: 6.25”(L) x 5.75”(W) x 10.5”(H) 159mm x 147mm x 265mm Weight: 7 Lbs. / 3 kgs.
PAGE 2
©2013 ADJ Products, LLC all rights reserved. Information, specifications, diagrams, images, and instructions herein are subject to change without notice. ADJ Products, LLC logo and identifying product names and numbers herein are trademarks of ADJ Products, LLC. Copyright protection claimed includes all forms and matters of copyrightable materials and information now allowed by statutory or judicial law or hereinafter granted.
PAGE 3
Inno Pocket Spot Fuse Replacement Locate and remove the unit’s power cord. Once the cord has been removed located the fuse holder located inside the power socket. Insert a flat-head screw driver into the power socket and gently pry out the fuse holder. Remove the bad fuse and replace with a new one. The fuse holder has a built-in socket for a spare fuse be sure not to confuse the spare fuse with active fuse.
PAGE 4
Distance(m) Distance(m) LUX 7600 2150 960 380 240 11 0 Inno Pocket Spot 1.0 2.0 4.0 ) General Instructions 5.0 To optimize the performance of this product, please read these operating instructions carefully to familiarize yourself with the basic operations of this unit. These instructions contain important safety information regarding the use and maintenance of this unit. Please keep this manual with the unit, for future reference. LED-SC25 Inno Pocket Spot 0 3.
PAGE 5
Inno Pocket Spot Channel 6 7 8 9 10 11 Value 190 - 193 194 - 255 0-7 8 - 15 16 - 131 132 - 139 140 - 181 182 - 189 190 - 231 232 - 239 240 - 247 248 - 255 0 - 255 0 - 255 1 - 69 70 - 79 80 - 89 90 - 99 100 - 109 110 - 119 120 - 129 130 - 199 200 - 209 210 - 249 250 - 255 0 - 41 42 - 84 85 - 127 128 - 170 171 - 213 214 - 255 11 Channel Mode Function STOP GOBO SCROLL SLOW - FAST SHUTTER/STROBE BLACKOUT SHUTTER OPEN STROBING SLOW - FAST SHUTTER OPEN SHUTTER SLOW OPEN - FAST CLOSE SHUTTER OPEN SHUTT
PAGE 6
Inno Pocket Spot Mounting When installing the unit, the trussing or area of installation must be able to hold 10 times the weight without any deformation. When installing the unit must be secured with a secondary safety attachment, e.g. and appropriate safety cable. Never stand directly below the unit when mounting, removing, or servicing the unit.
PAGE 7
Inno Pocket Spot Channel 5 6 7 8 9 Value 0-7 8 - 15 16 - 131 132 - 139 140 - 181 182 - 189 190 - 231 232 - 239 240 - 247 248 - 255 0 - 255 0 - 255 0 - 69 70 - 79 80 - 89 90 - 99 100 - 109 110 - 119 120 - 199 200 - 209 210 - 249 250 - 255 0 - 41 42 - 84 85 - 127 128 - 170 171 - 213 214 - 255 9 Channel Mode Function SHUTTER/STROBE BLACKOUT SHUTTER OPEN STROBING SLOW - FAST SHUTTER OPEN SHUTTER SLOW OPEN - FAST CLOSE SHUTTER OPEN SHUTTER FAST OPEN - SLOW CLOSE SHUTTER OPEN RANDOM STROBE SHUTTER OPE
PAGE 8
Inno Pocket Spot DMX Set Up Power Supply: The ADJ Inno Pocket Spot contains a automatic voltage switch, which will auto sense the voltage when it is plugged into the power source. With this switch there is no need to worry about the correct power voltage, this unit can be plugged in anywhere. DMX-512: DMX is short for Digital Multiplex.
PAGE 9
REMOTE CONTROL INPUT SOUND Inno Pocket Spot Remote Operation INPUT OUTPUT Inno Pocket Spot The UC-IR infrared remote gives you control of various functions (See below). To control the fixture you must aim the remote at the front of the fixture and be no more then 30 feet away. POWER COMMON DMX512 OUT 3-PIN XLR STROBE - This button will activate the strobe effect. You can control the flash rate by pressing the “DIMMER +” and “DIMMER -” buttons.
PAGE 10
Inno Pocket Spot DMX Set Up 5-Pin XLR DMX Connectors. Some manufactures use 5-pin DMX- 512 data cables for DATA transmission in place of 3-pin. 5-pin DMX fixtures may be implemented in a 3-pin DMX line. When inserting standard 5-pin data cables in to a 3-pin line a cable adaptor must be used, these adaptors are readily available at most electric stores. The chart below details a proper cable conversion.
PAGE 11
Inno Pocket Spot Operation Universal DMX Control: This function allows you to use a Elation® Inno Pocket Spot System Menu universal DMX-512 controller to control the chases and patterns, dimmer and strobe. A DMX controller allows you to create unique programs tailored to your individual needs. 1. The Inno Pocket Spot has 2 DMX channel modes; 9 channel mode or 11 channel mode. See pages 20-23 for detailed description of the DMX values and traits. 2.
PAGE 12
Inno Pocket Spot System Menu System Menu: When making adjustments press ENTER to confirm your setup then press and hold the MENU button for at least 3 seconds. To exit without making any adjustments press the MENU button. The display will lock after 30 seconds, press the MENU button for 3 seconds to unlock. ADDR - DMX Address Setting. 1. Press the either the MENU, UP, or DOWN buttons until “ADDR” is displayed, press ENTER. 2. The current address will now be displayed and flashing.
PAGE 13
Inno Pocket Spot System Menu the unit. 1. Press the either the MENU button until “VER” is displayed, press ENTER. 2. The display will show the software version. RSET - Use this function to reset the unit. 1. Press the MENU button until “RSET” is displayed, press ENTER. 2. The fixture will now reset. Inno Pocket Spot Home Adjustment Menu Inno Pocket Spot System Menu 1. Press the either the MENU button until “DIND” is displayed, press ENTER. 1 of 5 dimmer curves will be displayed.
PAGE 14
Inno Pocket Spot System Menu will automatically go into show mode. • BLAC (Blackout) - If the DMX signal is lost or interrupted, the unit will automatically go into stand by mode. 3. Press ENTER to confirm your desired set up. SOUN - Sound Active mode. 1. Press the MENU button until “SOUN” is displayed, press ENTER. 2. The display will show either “ON” or “OFF”. Press the UP or DOWN buttons to select “ON” to activate sound active mode, or “OFF” to deactivate sound active mode. 3.