User manual

ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 14
SPEED - Press this button and use the “+” & “-” buttons to adjust the
speed of the Built-In Programs.
SOUND ACTIVE - This button activates sound active mode. Use the
“+” & “-” buttons to adjust the sound sensitivity level.
R G B W/A - Press either one of these buttons and the press the
“+” or “-” to adjust the brightness. Press the Flash button to activate
strobing and use the “+” or “-” buttons to adjust the strobe speed.
NOTE: Press the W/A button to scroll through White, Amber, and UV.
“+” and “-” - Use these buttons to adjust the flash rate, speed of the
Auto Run and built-in programs, fade speed, sound sensitivity, and
output intensity. These buttons are also used to scroll through the
static colors and built-in programs.
Ultra Hex Bar 12 ADJ RFC Operation
ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 13
The ADJ RFC remote (sold seperately) has many different functions
and allows you to control your Ultra Hex Bar 12 from long distance.
The ADJ RFC remote can control your system up to 150 ft. To use
the RFC you must first activate the fixtures receiver, to activate the
receiver please see the instructions on pages 10-11.
BLACKOUT - Pressing this button will blackout the fixture. Press this
button for more then 3 seconds to activate default mode. All modes
will return to their default settings.
AUTO RUN - This button will activate the Auto Run mode. You can
control the fade speed by pressing the FLASH button twice and then
adjust the fade speed using the “+” and “-” buttons. Adjust the pro-
gram speed of the Auto Run by pressing the SPEED button and then
adjust the speed using the “+” and “-” buttons. Press the FLASH but-
ton once to activate strobe and adjust the strobe speed using the “+”
and “-” buttons.
PROGRAM SELECTION - This button will activate 1 of 2 modes;
Static Color mode or Program mode.
1. Press this button to activate Static Color mode. Use the “+” and “-”
buttons to scroll through the 63 colors. Once you have found your de-
sired color you can press the FLASH button to activate strobing. Use
the “+” and “-” buttons adjust the strobe speed.
2. Press this button to activate Program mode. Use the “+” and “-”
buttons to scroll through the 20 different programs. Once you have
found your desired program you can press the SPEED button and
use the “+” and “-” buttons to adjust the program speed. Adjust the
fade speed by pressing the FLASH button twice and use the “+” and
“-” buttons to adjust the fade speed. Press the FLASH button once to
activate strobe and adjust the strobe speed using the “+” and “-” but-
tons.
FLASH - This button will activate the flash (strobe) effect. You can
control the flash speed by pressing the “+” and “-” buttons. In Auto
mode and Program mode, press this button twice to enter fade
speed adjustment. Use the “+” and “-” buttons to adjust the fade
speed.
Ultra Hex Bar 12 ADJ RFC Operation