User manual

Ultra Hex Bar 12 Operating Instructions
Auto Run Mode:
1. Plug the fixture in and press the MODE button until “AUTO RUN
SPEED:XX” is displayed. “XX” represents the current auto run
speed.
2. Use the UP or DOWN button to adjust the speed between
“01” (slowest) and “16” (fastest). Once you have set your desired
running speed, press the SET UP button to adjust the fade speed
of the Auto Mode.
3. “FADE: XX” will be displayed. Use the UP or DOWN button to
adjust the speed between “01” (fastest) and “16” (slowest) or “00”
(Off).
4. After you have adjusted the fade speed you can then activate
strobing by pressing the SET UP button to enter the strobe mode.
5. “STRO: XX” will be displayed, this is strobe mode. The strobe can
be adjusted between “00” (flash off) to “15” (fastest flash).
Sound Active Mode:
In this mode the Ultra Hex Bar 12 will react to sound, and chase
through the different colors.
1. Plug the fixture in and press the MODE button until “SOUND PRO:
XX” is displayed. “XX” is the current sound sensitivity setting.
2. Use the UP or DOWN buttons to adjust the sound sensitivity.
“00” is off, “01 is the least sensitive, and “16” is the most sensi-
tive.
3. After you have adjusted the sound sensitivity you can then acti-
vate strobing by pressing the SET UP button to enter the strobe
mode.
4. “STRO: XX” will be displayed, this is strobe mode. The strobe can
be adjusted between “00” (flash off) to “15” (fastest flash).
ADJ RFC:
This function is used to activate and deactivate the ADJ RFC control.
When this function is activated you can control the fixture using the
ADJ RFC (Sold Separately). Please see the next page for ADJ RFC
controls and functions.
1. Plug the fixture in and press the MODE button until “OTHER” is
displayed.
2. Press the SET UP button until “RF: XX” is displayed. “XX” repre-
sents either “ON” or “OFF”.
ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 10ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 17
Ultra Hex Bar 12 12 Channel - DMX Values & Functions
Channel Value Function
1 RED
0 - 255 0% - 100%
2 GREEN
0 - 255 0% - 100%
3 BLUE
0 - 255 0% - 100%
4 WHITE
0 - 255 0% - 100%
5 AMBER
0 - 255 0% - 100%
6 UV
0 - 255 0% - 100%
7 COLOR MACROS
0 - 255 (See Color Macro Chart on page 20)
8 STROBING
0 - 31 OFF
32 - 63 LED ON
64 - 95 STROBING SLOW - FAST
96 - 127 LED ON
128 - 159 STROBE PULSE SLOW - FAST
160 - 191 LED ON
192 - 223 RANDOM STROBING
224 - 255 LED ON
9 MASTER DIMMER
0 - 255 0% - 100%
10 PROGRAMS
0 OFF
1 - 24 PROGRAM 1
25 - 35 PROGRAM 2
36 - 46 PROGRAM 3
47 - 57 PROGRAM 4
58 - 68 PROGRAM 5
69 - 79 PROGRAM 6
80 - 90 PROGRAM 7