User manual

ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 9
Ultra Hex Bar 12 Operating Instructions
the UP and DOWN buttons to adjust intensity.
8. After you have adjusted the colors to make your desired color
you can then activate strobing by pressing the SET UP button to
enter the strobe mode.
9. “STRO: XX” will be displayed, this is strobe mode. The strobe
can be adjusted between “00” (flash off) to “15” (fastest flash).
Static Color Mode:
1. Plug the fixture in and press the MODE button until “CLR MACS”
is displayed. Press the SET UP button so that “COLOR:XX” is dis-
played. “XX” represents the current displayed macro.
2. There are 63 colors to choose from. Use the UP and DOWN but-
tons to scroll through the 63 colors. After you have found your
desired color you can activate strobing by pressing the SET UP
button to enter the strobe mode.
3. “STATIC STRO:XX” will be displayed, this is strobe mode. The
strobing can be adjusted between “00” (flash off) to “15” (fastest
flash).
Program Mode:
1. Plug the fixture in and press the MODE button until “PROG RUN
PROG:XX” is displayed. “XX” represents the current program that
is running.
2. Use the UP or DOWN buttons to scroll through the 20 programs.
Once you have found your desired program press the SET UP
button to adjust the program speed.
3. “SPEED:XX” will be displayed. Use the UP or DOWN button to
adjust the speed between “01” (slowest) and “16” (fastest). Once
you have set your desired running speed, press the SET UP but-
ton to to enter the fade adjustment mode.
4. “FADE: XX” will be displayed. Use the UP or DOWN button to
adjust the speed between “01” (fastest) and “16” (slowest) or “00”
(Off).
5. After you have adjusted the fade speed you can then activate
strobing by pressing the SET UP button to enter the strobe mode.
6. “STRO: XX” will be displayed, this is strobe mode. The strobe can
be adjusted between “00” (flash off) to “15” (fastest flash).
ADJ Products, LLC - www.adj.com - Ultra Hex Bar 12 User Manual Page 18
Ultra Hex Bar 12 12 Channel - DMX Values & Functions
Channel Value Function
10 PROGRAMS
91 - 101 PROGRAM 8
102 - 112 PROGRAM 9
113 - 123 PROGRAM 10
124 - 134 PROGRAM 11
135 - 145 PROGRAM 12
146 - 156 PROGRAM 13
157 - 167 PROGRAM 14
168 - 178 PROGRAM 15
179 - 189 PROGRAM 16
190 - 200 PROGRAM 17
201 - 211 PROGRAM 18
212 - 222 PROGRAM 19
223 - 233 PROGRAM 20
234 - 255 SOUND ACTIVE PROGRAMS
11 PROGRAM SPEED/SOUND SENSITIVE
0 - 255 SLOW - FAST
0 - 255 LEAST SENSITIVE - MOST SENSITIVE
12 DIMMER MODE
0 - 20 STANDARD
21 - 40 STAGE
41 - 60 TV
61 - 80 ARCHITECTURAL
81 - 100 THEATRE
101 - 255 DEFAULT DIMMER SETTING
When Channel 7 is being used, Channels 1-6 will not work.
When Channel 10 is between the values of 1-233, Channel 11 will control the
program speed.
When Channel 10 is between the values of 234-255, Channel 11 will control the
sound sensitivity.