User manual

ADJ Products, LLC - www.adj.com - WiFly EXR QA5 IP User Manual Page 7
1. Handling of Batteries
1.1 Do Not Short Circuit the Battery
Try to never short circuit the battery. It generates a very high
current which could cause the battery to overheat which may
result in electrolyte gel leakage, harmful fumes, or explosion.
The LIR tabs may easily short-circuit by placing them on con-
ductive surface. A short circuit may lead to heat build up and
damage of the battery. An appropriate circuitry with PCM is
employed to protect accidental short circuit of the battery pack.
1.2 Mechanical shock
Droping the unit, impact hit, bending, etc. may cause failure or
shortend life of the LIR battery.
3. Other
3.1 Battery connection
1). Direct soldering of wire leads or devices to the battery is
strictly prohibited.
2). Lead tabs with pre-soldered wiring shall be spot welded to
the batteries. Direct soldering may cause damage of compo-
nents, such as separator and insulator, by heat build up.
3.2 Prevention of short circuit within a battery pack
There is enough insulation layers between wiring and the bat-
teries to provide extra safety protection. The battery pack is
constructed in a way that no short circuit will occur which may
cause smoke or re.
3.3 Do Not Disassemble the Batteries
1). Never disassemble the batteries.
Doing this may cause a internal short circuit in the battery,
which may lead to harmful fumes, re, explosion, or other prob-
lems.
2). Electrolyte Gel is harmful
Electrolyte Gel should not leak from the LIR battery. Should the
electrolyte gel come into contact with the skin or eyes, ush the
WiFly EXR QA5 IP Battery Precautions
ADJ Products, LLC - www.adj.com - WiFly EXR QA5 IP User Manual Page 28
Channel Value Function
9 PROGRAM & AUTO RUN SPEED
0 - 255 SLOW-FAST
10 COLOR TEMPERATURES
0 - 28 3200K
29 - 57 3500K
58 - 86 4200K
87 - 114 4500K
115 - 142 5200K
143 - 170 5500K
171 - 198 6200K
199 - 226 6500K
227 - 255 7200K
11 DIMMER CURVES
0 - 20 STANDARD
21 - 40 STAGE
41 - 60 TV
61 - 80 ARCHITECTURAL
81 - 100 THEATRE
101 - 255 DEFAULT TO UNIT SETTING
WiFly EXR QA5 IP 11 Channel - DMX Values & Functions
When Channel 7 is between the values of 0-51, Channels 1-4 are used, and Channel 6
will control strobing.
When Channel 7 is between the values of 52-102, Channel 8 is in Color Macros
Mode, and Channel 6 will control strobing.
When Channel 7 is between the values of 103-153, Channel 8 is in Color Change
Mode, and Channel 9 will control the color change speed.
When Channel 7 is between the values of 154-204, Channel 8 is in Color Fade Mode,
and Channel 9 will control the color fade speed.
When Channel 7 is between the values of 205-255, Channel 8 is in Auto Run Mode,
and Channel 9 will control the auto run speed.