User manual
ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 15
ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 14
Universal DMX Control: This function allows you to use a universal
DMX-512 controller to control the chases and patterns, dimmer and
strobe. A DMX controller allows you to create unique programs tai-
lored to your individual needs. The WiFly EXR Dotz Par has 5 DMX
channel modes; a 3 Channel Mode, 4 Channel Mode, two 5 Channel
Modes, & 9 Channel Mode. See pages 18-21 for the DMX channel
modes and traits.
1. This function will allow you to control each individual fixture’s
traits with a standard DMX 512 controller.
2. To run your fixture in DMX mode, follow directions on page 10 to
set your DMX address and DMX Channel mode.
3. Plug in the fixture via the XLR connections to any standard DMX
controller.
4. For longer cable runs (more than a 100 feet) use a terminator on
the last fixture.
WiFly EXR Dotz Par DMX Control
With this feature you are able to control the unit with DMX without the
need of XLR cables. Your DMX controller must be connected to a ADJ
WiFly EXR Transceiver to use this function. You are able to communi-
cate up to 1,200 feet (open line of sight) when using a ADJ WiFly EXR
Battery Transceiver.
1. Follow the instructions on page 14 to set the Wireless channel.
The address must match the address set on the WiFly Transceiver.
2. After you have set the WiFly address, follow the DMX instructions
on page 7 to select your desired DMX Channel mode and set
your DMX address.
4. Apply power to the ADJ WiFly EXR Battery Transceiver. The fixture
must be set up first before you apply power to WiFly Transceiver.
5. If everything is set up properly and the fixture is receiving a
Wireless signal, Wireless status LED next to LED screen will glow
green.
WiFly EXR Dotz Par WiFly DMX Control
Slave Mode - This will let you set your unit as a slave in
a master/slave conguration.
1. Press the MODE button until “SLAVE MODE” is displayed.
Your unit will now follow the Master.
Wireless Channel - This function will let you set the
wireless channel.
1. Press the MODE button until “Wireless CH: XX” is displayed.
“XX” represents the current channel setting.
2. Press the ENTER button and a ashing underscore will appear
under the channel setting. Use the UP or DOWN buttons to nd
your desired wireless channel. Press ENTER to set the channel.
Battery Ind. - This function will let you switch battery life
indicators on/off.
1. Press the MODE button until “Battery Ind.” is displayed.
2. Press the ENTER button and a ashing underscore will appear
under the current setting. Use the UP or DOWN buttons to nd
you desired and setting and press ENTER.
WiFly EXR Dotz Par System Menu