User manual

ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 22
(Fade Time) (Fade Time)
Ramp Effect
Standard
Stage
TV
Architectural
Theatre
WiFly EXR Dotz Par Dimmer Curve Chart
WiFly EXR Dotz Par Removable Lens
The WiFly EXR Dotz Par comes with 66 degree lens already attached.
The lens is held in place by two magnets on either side. To remove
the lens simply rotate the lens so that lens comes o its magnets and
lift to remove. The other way to remove it is to grab the edges of the
lens and life up. When the lens is removed the xture will have a 20
degree beam angle.
WiFly EXR Dotz Par Adjustable Sitting Angle
WiFly EXR Dotz Par Photometrics
Lens O
Lens On
128
239
325
646
34
68
81
175
15
29
38
81
8
16
22
48
5
10
14
31
Intensity(LUX)
Beam angle
Field angle 103°
66°
0
0 1 2 3 4 5
1
1
2
2
3
4
Beam opening(m)
3
4
66 103
Red LEDs
Green LEDs
Blue LEDs
Full LEDs
2.55
1.27
3.82 5.10 6.3766° Diameter (m)
5.21
2.61
7.82 10.43 13.03103°
Diameter (m)
2470
3260
5060
11950
815
1054
1644
3280
406
540
839
1545
241
316
486
940
147
198
324
611
Intensity(LUX)
Beam angle
Field angle 25°
20°
0
0 1 2 3 4 5
1
1
2
2
3
4
Beam opening(m)
3
4
20 25
Red LEDs
Green LEDs
Blue LEDs
Full LEDs
0.71
0.35
1.06 1.41 1.7620°
Diameter (m)
25°
Diameter (m) 0.880.45 1.33 1.77 2.21
ADJ Products, LLC - www.adj.com - WiFly EXR Dotz Par User Manual Page 23
The standing angle of the unit can be manually adjusted by turning
the knob on the front panel counter clockwise. Turning this knob will
allow the bottom front part of the unit to lower so that the unit can sit
at a desired angle. Turn the knob clockwise to lock the position.
WiFly EXR Dotz Par Shield Attachment
The included shield is block unwanted light exposure when the xture
is used for uplighting. To attach the shield locate the thumb screws
on each side of the unit. Remove the thumb screws, place the shield
on the unit lining up the screw holes on the shield with screw holes on
the unit. Reinsert the thumb screws and tighten.