User manual

ADJ Products, LLC - www.adj.com - Galaxian Gem IR Instruction Manual Page 15ADJ Products, LLC - www.adj.com - Galaxian Gem IR Instruction Manual Page 14
DISP - This function will reverse the display 180º.
1. Press the MENU button until “DISP” is displayed, press ENTER.
2. Press the UP button to select “DSIP” to activate this function, or
“DISP” to deactivate this function.
3. Press ENTER to conrm.
TEST - This function will run a self test program.
1. Press the MENU button until “TEST” is displayed, press ENTER.
2. The xture will now run a self test.
FHRS - With this function you can display the running
time of the xture.
1. Press the MENU button until “FHRS” is displayed, press ENTER.
2. The display shows the running time of the unit. Press MENU to
exit.
VER - With this function you can display the version soft-
ware of the unit.
1. Press the MENU button until “VER” is displayed, press ENTER.
2. The display will now display the version of software. Press MENU
to exit.
Galaxian Gem IR System Menu
SOUN - Sound Active mode.
1. Press the MENU button until “SOUN” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to activate sound active mode, or
“OFF” to deactivate sound active mode.
3. Press ENTER to conrm, then press and hold the MENU button for
at least 3 seconds to activate.
SENS - Sound sensitivity control.
1. Press the MENU button until “SENS” is displayed, press ENTER.
2. The display will show a number between 0-100. Press the UP or
DOWN buttons to adjust the sound sensitivity. 0 being the least sen-
sitive and 100 the most sensitive.
3. Press the ENTER button to conrm.
BLND - Blackout or Stand by mode.
1. Press the MENU button until “BLND” is displayed, press ENTER.
Either Yes or No will be displayed.
2. To activate Blackout tap the UP or DOWN buttons until “Yes” is
displayed, press ENTER to conm. The xture will now be in Blackout
mode. To deactivate Blackout mode, select “No” and press Enter.
LED - With this function you can have the LED display
turn off after 10 seconds.
1. Press the MENU button until “LED” is displayed, press ENTER.
2. The display will show either “ON” or “OFF”. Press the UP or
DOWN buttons to select “ON” to keep the LED display on at all
times, or “OFF” to switch to have the LED display switch o after 10
seconds.
3. Press ENTER to conrm.
Galaxian Gem IR System Menu