User manual

ADJ Products, LLC - www.adj.com - Galaxian Gem IR Instruction Manual Page 13ADJ Products, LLC - www.adj.com - Galaxian Gem IR Instruction Manual Page 12
System Menu: When making adjustments press ENTER
to conrm your setup and then press and hold the MENU
button for at least 3 seconds. To exit without making any
adjustments press the MENU button.
ADDR - DMX Address Setting.
1. Press the MENU, UP, or DOWN buttons until “ADDR” is displayed,
press ENTER.
2. The current address will now be displayed and ashing. Press the
UP or DOWN buttons to nd your desired address. When you have
found your desired address press ENTER.
SLND - This will let you set unit as a master or slave in
a master/slave conguration.
1. Press the MENU button until “SLND” is displayed, press ENTER.
“MSTR”, “SL 1” or “SL 2” will be displayed.
2. Press the UP or DOWN buttons until your desired setting is dis-
played, press ENTER to conm and exit.
NOTE: In a Master/Slave conguration you can make one xture the
Master and then set the next xture to “SL 2”, the xtures will now
have contrast movement to each other.
SHND: SH 0 - SH8 - Show modes 0-8 (Factory pro-
grams). Show mode can run with or without sound active
mode.
1. Press the MENU button until “SHND” is displayed, press ENTER.
2. “Sh X” will now be displayed, “X” representing a number between
0-8. Programs 1-8 are factory programs, while “Sh 0” is random mode.
Press the UP or DOWN buttons to nd your desired show.
3. When you have found your desired show press ENTER, then press
and hold the MENU button for at least 3 seconds to activate.
Galaxian Gem IR System Menu Galaxian Gem IR System Menu Chart