User Guide
20
APP INSTRUCTIONS
Colors
The color eects are situated to the right of the console. 8 eects are available and will be applied to all
RGB/RGBW or CMY color mixing lights. Lights with xed colors may also be used with the color eects,
but they will not mix in the same way as color mixing xtures.
Choosing an Eect
Tap one of the 8 segments to play an eect across your lights. Once an eect has been chosen, the
Fade, Speed, Shift and Size of the eect can be adjusted by tapping any of the 4 buttons in the center.
The available options depend on the selected eect. Note: make sure that the xtures are in the correct
order because eect results may vary based on xture order.
Setting a color
To set which colors will be used in the eects; tap the color wheel at the bottom right. The color wheel
is used to set the colors for the eects, and the segments around the color wheel are used to override
the eect and recall static colors on all xtures with xed color wheels. Tap in an empty space in the
color wheel to add a color. Drag a color point outside the color wheel to remove it. Up to 6 colors can
be selected in the color wheel + 6 static colors with the segments. These are displayed below the color
wheel.
Static colors are always xed and are spread across lights with xed color wheels. Change the pattern
by tapping the button to the left of the color wheel button. This pattern button is also used with color
mixing xtures in the STOP eect.