User Guide

15
APP INSTRUCTIONS
Addressing Features
Each DMX xture is assigned a unique number so that myDMX GO knows which xture to send the
correct information to.
To address a xture:
1. Tap the xture in the list and look at the Start address number
2. Use the digital display on the actual xture to set the same number.
Refer to the xture manufacturers manual on how to do this.
Some xtures use DIP switches instead of a digital display. The correct DIP switches are shown
on the right.
* If you have already set up your xture and it’s not practical to change the DMX address, this can
be changed by tapping the Start Address number. Note that the end address is xed because the
number of channels a xture uses is xed.
Changing The Order Of The Fixtures
All eects are applied in the order the xtures appear in the list.
For example, if you have the myDMX GO color eect chasing between xtures, it will start at xture 1
and end at the last xture in the list. To change the order of xtures, tap and hold a xture and drag it to
a dierent position in the list (this will not aect the DMX address of the xture).