User Guide
14
APP INSTRUCTIONS
Create A New Project
To create a project, tap the menu button and tap “Create a Project”.
If you currently have an open project, you will have the option to copy the presets and xtures from the
current open project, or start a new project.
Tapping the 3 dots next to the project name allows you to rename a project or delete it.
Adding Fixtures
To add xtures to your project, tap the menu button and then “Fixtures”. To add a xture:
1. Tap the “Brand” button at the bottom of the screen and select the brand.
2. Select a device prole. Notice each prole has a colored dot to the right:
• Red means the device must be downloaded from the cloud. (An Internet connection is
required for this.)
• Green means you have the device on your tablet already.
• Yellow means you have the device on your tablet, however an updated version is available.
3. Select a “Mode”.
Some xtures have dierent operation modes that take up dierent amounts of channels.
Be sure you have the same mode selected on your xture. (To check the settings your xture,
please refer to the owner’s manual that was provided with your xture).
4. Tap “Add A Fixture”.
* There are over 15,000+ xture proles available.
If you do not see a prole for your xture, visit https://store.lightriderapp.com/en/ssl to create a New Fixture Request.