Installation Manual

9
USING A PROFILE WITH A LIGHTING CONTROLLER
myDMX GO
To use a prole created with Prole Builder in myDMX GO:
1. Log in to myDMX GO with the same Light Cloud account used to create the prole.
2. Navigate to the Fixture screen and tap the User button at the bottom left of the screen.
The User library is refreshed each time the Fixtures screen is loaded or the User button is tapped.
Copying a prole to a computer (Android only)
Proles can be copied to your computer to use with other supported DMX software such as myDMX
and Compu Show. To do this, please follow the following steps:
1. Connect your tablet to your computer.
2. Open Android File Browser
3. Navigate to the USER SSL Library folder which is normally located in the roof of your storage folder.
(Note: Tablet types may vary and it may not always be possible to perform this operation.)