Installation Manual
5
FIXTURE PROFILES
Creating A New Fixture
tap the “+ Prole” button (bottom left) to create a new xture. Enter a name and manufacturer are listed
on the left and xtres are listed on the right. A small circle is shown to the top right of each xture. If the
circle is green, the xture is synchronised with Light Cloud. If it is red, the xture is not synchronised.
The App will do this automatically when connected to Light Cloud.
Connecting With A DMX Interface
Once a xture has been created, the Fixture Editor screen will be shown. While building a prole, the
Prole Builder app will also allow you to control the xture live. Live control helps to see wether the
values in the prole are correct. To do this, a compatible DMX device is required. Press the lightening
bolt icon to the top right of the screen to connect to a DMX device.
Android compatibility:
• Any SUT (Smart Upgrade Technology) device with a USB cable. An OTG (On-The-Go) cable may be
required to convert from the USB socket on the Android tablet to the USB socket on the DMX interface.
• Any SUT device over WiFi. These devices include the mydmx GO, mydmx Buddy, mydmx Amigo,
mydmx 3.0, CompuShow, LR512, Sunlite-EC and SLESA-U10.
iOS compatibility:
• Any SUT device over WiFi. These devices include mydmx GO, mydmx Buddy, mydmx Amigo,
mydmx 3.0, CompuShow, LR512, Sunlite-EC and SLESA-U10.
• Note: the USB camera adapter for iPad does not work with USB-DMX devices.