Model # 629-202 Double Tier Locker OUBLE LOCKER sembly & installation guide ADI629-202-SERIES USER GUIDE
Thank you for your purchase. AdirOffice has a commitment to deliver quality and stylish office furniture and equipment. We understand starting and maintaining a business is expensive enough. We can help you make it cost effective and beautiful. Plus, our expert team makes sure everything you need works as efficiently as possible.
Table of Contents 1 Introduction 2 Parts List 4 Assembly Instructions 11 Installation Instructions 13 Notes 15 Limited Warranty 16 Disclaimer
Introduction INTRODUCTION The AdirOffice Double Tier Locker is designed to provide storage and security for your home or office. The are Double conveniently so that they canstorage be installed with multiple units if desired. The lockers AdirOffice Lockerdesigned is designed to provide and security for your home or office. The lockers are conveniently designed so that they can be installed with multiple units if desired. Single Unit Use a single, standalone unit.
s + Washers x4 ll Anchors x2 Nuts Flat Head Screws Keys x4 x4 1 set of 2 keys Round Head Bolts + Washers 1. Bolts (x4) Screw Shelf Brackets Nuts 3. Nuts (x4) Head Screws Coat Hooks 4.Flat Double Hooks (x2) x4 x2 Keys(x2) 5. Keys 1 set of 2 keys Shelf Brackets Pencil Coat Hooks Parts Included INCLUDED HARDWARE: x7 x4 2. Washers (x4) x8 x4 QUIRED TOOLS: cluded llips Screwdriver Round Head Screw Wall Anchors Drill + Drill Bit 6. Wall Anchors (2) x2 7.
PARTS Parts Included Door PanelLocker Double A. B. C. D. Left Panel Top Panel Back Panel E. F. G. H.
Assembly Instructions STEP 1: ASSEMBLY INSTRUCTIONS A. Place the Left Panel (B) onto the left side of the Back Panel (D). B. Line up the “C” shape of the Left Panel (B) so that it hooks under the “L” shape of the Back Panel (D). C. A djust as needed so that the screw holes line up. Using a Phillips screwdriver and the included Double Locker Round Head Screws (7), secure the two panels together at the points shown. 1.
ASSEMBLY INSTRUCTIONS Assembly Double Locker Instructions STEP 2: A. Place the Right Panel (E) onto the right side of the Back Panel (D). Line it up so that thepanel “C” shapeto of the Right Panel (E) hooks under the “L” shape of the Back right back panel 2.B.Attach Panel (D), as described in Step 1. Ɣ Place the right panel onto the right side of the back panel.a Phillips screwdriver and the included C. Adjust as needed so that the screw holes line up.
ASSEMBLY INSTRUCTIONS Assembly Instructions Double Locker STEP 3: A. Stand the 3 assembled sides of the locker up. B. To attach the Door Panel (A) piece, move the Door Panel (A) into the locker at an angle so that it is completely inside of the enclosure. 3 Attach door panel C. There is a “pocket” located at the top and bottom of each side panel into which the Door Panel (A) should insert. Ɣ Stand the 3 Panel assembled sides ofensuring the locker up. D.
Assembly Instructions STEP 4: A. Once the Door Panel (A) is attached, it is time to secure the Door Panel (A) by attaching the Top Panel (C) and Bottom Panel (G). B. Set the Top Panel (C) on top of the locker and screw it into place with 2 Round Head Screws (7) with the hook facing out. C. Open the Door Panel (A) and secure it using the screwdriver and Round Head Screws (7) at each corner, where shown. D.
Assembly Instructions C B C B A C A 7 D F F E D F B E D G A A E B G B E 7 D D 8
AS ASSEMBLY INSTRUCTIONS Assembly Instructions Do 5: DoubleSTEP Locker A. A ttach the Double Hooks (4) to the Back Panel (D) using a Phillips screwdriver and the included Round Head Screws (7). 5. Attach coat hooks Ɣ Attach the coat hooks to the back panel using a Phillips 7 screwdriver and the included screws.
ASSEMBLY INSTRUCTIONS Assembly Instructions Double Locker STEP 6: A. Place the 4 Shelf Brackets (8) at the desired height for your Shelves (F). Ensure the brackets are at the same height on each of the rails. B. Set the shelf down over the Shelf Brackets (8) to secure it. Repeat for the second shelf. shelves 6 Install Ɣ Place the 4 shelf brackets at the desired height for your shelf. Ensure the brackets are at the same height on each of the rails. Ɣ Set shelf down over the brackets to secure.
Double Locker Before you begin Installation Instructions Mount the locker(s) to a wall for optimal safety. Multiple Locker Units A. If you are using multiple locker units, secure them to each other for safety and security. B. Set the lockers next tounits each other. Ensure the mounting holes towards the top of the Right Multiple locker Panel (E) of the left locker line up with the corresponding mounting holes on the Left Panel (B) of are the using right locker.
INSTALLATION INSTRUCTIONS Installation Instructions Double Locker Mounting Locker Units A. There are two holes near the top of the Back Panel (D) of your locker. B. Place your locker where you want to install it. Using a pencil, mark the location of each of these holes on the wall. Mounting the locker unit(s) to the wall C. Remove the locker(s) from the wall.
Notes 13
Notes 14
Limited Warranty 1. A dirCorp (the company) warrants to the purchaser that the product will be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. 2. These warranties are not assignable or transferable to any other person. 3.
Disclaimer By purchasing products from AdirCorp, user agrees as follows: TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION ON THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ADIRCORP. MAKES NO PROMISES, REPRESENTATIONS, OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE PRODUCTS AND INFORMATION, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND ADIRCORP.
Item Number: ADI629-202-SERIES 64 Mountainview Blvd. • Wayne, NJ • 07470 • © 2021 AdirCorp adircorp.
