Single Tier Locker ADI629-201-SERIES USER GUIDE
Thank you for your purchase. AdirOffice has a commitment to deliver quality and stylish office furniture and equipment. We understand starting and maintaining a business is expensive enough. We can help you make it cost effective and beautiful. Plus, our expert team makes sure everything you need works as efficiently as possible.
Table of Contents 1 Introduction 2 Parts List 4 Assembly Instructions 10 Installation Instructions 12 Notes 15 Limited Warranty 16 Disclaimer
INTRODUCTION Introduction The Locker is is designed designedto toprovide providestorage storageand andsecurity securityfor foryour your home office. The AdirOffice AdirOffice Single Single Locker home oror office. The lockers are conveniently designed so that they can be installed with multiple units if desired. he lockers are conveniently designed so that they can be installed with multiple units if desired. Single Unit Use a single, standalone unit. Multiple Units Mount multiple lockers together.
s + Washers x4 all Anchors x2 Parts Included INCLUDED HARDWARE: Nuts Flat Head Screws Keys x4 x4 1 set of 2 keys Bolts + Washers Round Head 1. Bolts (x4) Screw Nuts Shelf Brackets 3. Nuts (x4) Head Screws Coat Hooks 4.Flat Double Hooks (2) x4 x2 Keys(x2) 5. Keys 1 set of 2 keys Shelf Brackets Pencil Coat Hooks x4 x7 2. Washers (x4) x4 x8 QUIRED TOOLS: cluded Round Head Screw Wall Anchors illips Screwdriver Drill + Drill7.Bit 6.
PARTS Parts Included A. Door Panel Single Locker B. Left Panel C. Top Panel D. Back Panel E. Right Panel F. Shelves G.
ASSEMBLY INSTRUCTIONS Assembly Instructions Single Locker STEP 1: A. A ttach the Double Hooks (4) to the Left Panel (B) and Right Panel (E) using a Phillips screwdriver and the included Round Head Screws (7). 1. Attach coat hooks Ɣ Attach the coat hooks to the left and right panels using a Phillips screwdriver and the included screws.
Assembly Instructions STEP 2: ASSEMBLY INSTRUCTIONS A. Place the Left Panel (B) onto the left side of the Back Panel (D). B. Line up the “C” shape of the Left Panel (B) so that it hooks under the “L” shape of the Back Panel (D). Single Locker C. A djust as needed so that the screw holes line up. Using a Phillips screwdriver and the included Round Head Screws (7), secure the two panels together at the points shown. 2.
ASSEMBLY INSTRUCTIONS Assembly Instructions Single Locker STEP 3: A. Place the Right Panel (E) onto the right side of the Back Panel (D). B. Line it up so that the “C” shape of the Right Panel (E) hooks under the “L” shape of the Back right panel to 2.back panel Panel (D), as described in Step 3. Attach Ɣ Place right onto side ofholes the back panel. C. the djust A aspanel needed sothe thatright the screw line up.
Assembly Instructions STEP 4: A. Stand the 3 assembled sides of the locker up. ASSEMBLY B. To INSTRUCTIONS attach the Door Panel (A) piece, move the Door Panel (A) into the locker at an angle so that it is completely inside of the enclosure. C. There is a “pocket” located at the top and bottom of each side panel into which the Single Locker Door Panel (A) should insert. 4 D. Pull the Door Panel (A) forward, ensuring that the panel inserts into the “pocket” on each panel, as illustrated.
Assembly Instructions STEP 5: A. Once the Door Panel (A) is attached, it is time to secure the Door Panel (A) by attaching the Top Panel (C) and Bottom Panel (G). ASSEMBLY INSTRUCTIONS B. Set the Top Panel (C) on top of the locker and screw it into place with 2 Round Head Screws (7) with the hook facing out. Single Locker C. Open the Door Panel (A) and secure it using the screwdriver and Round Head Screws (7) at each corner, where shown. D. W ork the Bottom Panel (G) into the bottom of the locker.
Assembly Instructions STEP 6: A. Place the 4 Shelf Brackets (8) at the desired height for your Shelves (F). Ensure the brackets are at the same height on each of the rails. B. Set the shelf down over the Shelf Brackets (8) to secure it. Repeat for the second shelf.
Single Locker Before you begin Installation Instructions Mount the locker(s) to a wall for optimal safety. Multiple Locker Units A. If you are using multiple locker units, secure them to each other for safety and security. B. Set the lockers next tounits each other. Ensure the mounting holes towards the top of the Right Multiple locker Panel (E) of the left locker line up with the corresponding mounting holes on the Left Panel (B) ofare theusing right locker.
Installation Instructions INSTALLATION INSTRUCTIONS Mounting Locker Units A. There are two holes near the top of the Back Panel (D) of your locker. B. PSingle lace yourLocker locker where you want to install it. Using a pencil, mark the location of each of these holes on the wall. C. Remove the locker(s) from the wall. In the marked locations, drill a hole large enough for the Wall Anchors (6) (Make sure you don’t drill it too large!) Mounting the locker unit(s) to the wall D.
Notes 12
Notes 13
Notes 14
Limited Warranty 1. A dirCorp (the company) warrants to the purchaser that the product will be free from defects in workmanship and materials for a period of one (1) year from the date of purchase. 2. These warranties are not assignable or transferable to any other person. 3.
Disclaimer By purchasing products from AdirCorp, user agrees as follows: TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION ON THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ADIRCORP. MAKES NO PROMISES, REPRESENTATIONS, OR WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO THE PRODUCTS AND INFORMATION, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND ADIRCORP.
Item Number: ADI629-201-SERIES 64 Mountainview Blvd. • Wayne, NJ • 07470 • © 2021 AdirCorp adircorp.
