Instructions / Assembly

5
Assembly Instructions
STEP 4:
Insert the Plastic Hinge Bush (I) in the hole on
the bottom right of the locker’s Front Leg (5).
Insert the Small Hinge Pin (F) in the hole on top of
the locker door (See Figure 1 on the next page).
Insert the Small Hinge Pin (F) with the Door (1) in
the hole located under the right side of the Top
Panel (7). (See Figures 2 and 3 on the next page.)
Next, take the Large Hinge Pin (E), insert it into the
hole on the bottom of the Door (1), lock it into
place by passing it through the slot on the Door
(1). (See Figures 4, 5, 6).
I