Instructions / Assembly

5
Assembly Instructions
J
STEP 4:
Insert the Plastic Hinge Bush (J) in the
hole on the bottom right of the locker’s
Front Leg (5).
Insert the Small Hinge Pin (E) in the hole
on top of the locker door (See Figure 1
on the next page).
Insert the Small Hinge Pin (E) with the
Door (1) in the hole located under the
right side of the Top Panel (7).
(See Figures 2 and 3 on the next page.)
Next, take the Large Hinge Pin (D), insert
it into the hole on the bottom of the
Door (1), lock it into place by passing
it through the slot on the Door (1). (See
Figures 4, 5, 6).