Use and Care Manual

10
Assembly Instructions
STEP 8
A. Take all 2 Horizontal Edge Channel’s (F), lay them
on a at, clean surface.
B. Place all 6 Vertical Edge Channel’s (G) on top and
lightly push them into place, as pictured.
C. Once assembled, place the whole structure
in-between the Left-Side Panel (A) and the
Right-Side Panel (2).
STEP 9
A. Place the assembled edge channel’s on
top of the built structure of the Horizontal
Panels (F) and the Vertical Panels (G).
F
G
7
6