Use and Care Manual

Assembly Instructions

for MODEL 617

www.adircorp.comPage 1 of 2

Pivot wall rack

Item Description QTY.

Bracket 1

Hanger 12

Item Description QTY.

Spring 12

Mounting

Screw

Washer 6

Tools required for assembly: Phillips screwdriver

PARTS LIST

PAGE 1
Pivot wall rack Assembly Instructions for MODEL 617 PARTS LIST Item A B Description QTY. Bracket Hanger Item Description QTY. C Spring 12 D Mounting Screw 6 E Washer 6 1 12 Tools required for assembly: Phillips screwdriver Page 1 of 2 www.adircorp.
PAGE 2
Pivot wall rack Assembly Instructions for MODEL 617 1. Screw bracket into wall. Installation recommended on wall studs or solid – back wall surface. 2. Place spring onto top of hanger small end down (x12). Guide hanger into top holes of bracket placing the spring side into top holes first, and then push up hanger placing the bottom of hanger into bottom holes. Page 2 of 2 www.adircorp.