Hi-Lo Treatment Table ADI903-01 USER GUIDE
Thank you for your purchase. AdirMed maintains a strong practice of ongoing development of products and commercial research. We recognize that starting and maintaining a medical practice is expensive. We’ll help make the process cost-effective and elegant. Additionally, our team of specialists will ensure everything you need works as efficiently as possible, so you can effectively treat your clients.
Table of Contents 1 Important Safety Information 3 Instructions For Use 6 Maintenance and Care 7 Warranty 8 Disclaimer
Important Safety Information ! WARNING • Improper setup, operation, or poorly maintained equipment may cause personal injury. • To avoid this hazard, read and follow the instructions in this manual carefully. • Check the padding and upholstery when unpacking the table. Do not use it if there are signs of damage. (Our warranty excludes damage caused to the table by improper setup, accident, abuse, or use other than the table’s intended purpose.
Important Safety Information ! ELECTRIC SHOCK DANGER • The power supply/control box is located below the table. For safety purposes, DO NOT touch the power supply and control box when the table is in operation. • Set up the table and complete all the preparatory work before connecting the power. • Check the voltage rating on the serial plate of the motor. The motor’s plug should only be inserted into a 110 VAC or 220 VAC power outlet as indicated on the serial plate.
Instructions For Use ADJUSTING THE HEIGHT OF THE TABLE: • H eight adjustment is achieved with the foot bar switch. The Hi-Lo function could be adjusted from four sides. • TO RAISE THE TABLE: Push the foot bar control to left. • TO LOWER THE TABLE: Push the foot bar control to the right. ADJUSTING THE HEAD SECTION: TO RAISE THE HEAD SECTION: Operate the head section by the gas spring system. 3 TO LOWER THE HEAD SECTION: Operate the head section by the gas spring system.
Instructions For Use ADJUSTING THE BACK SECTION: TO RAISE THE BACK SECTION: Operate the back section by the gas spring system. Push the back section UP to the angle you want. TO LOWER/FLATTEN THE BACK SECTION: Operate the head section by the gas spring system. Glide the back section DOWN to the angle you want.
Instructions For Use APPLYING THE FOOT RELEASE CASTER SYSTEM ALL TABLES ARE AVAILABLE WITH A FOOT RELEASE CASTER SYSTEM • TO MAKE MOBILE: Place your foot on the positioning lever and push downward. • TO MAKE STATIONARY: Lift the positioning lever up with your foot. NOTE: DO NOT USE CASTER SYSTEM DURING TREATMENT/ THERAPY OR FOR PATIENT TRANSPORT. THE MOBILE OPTION IS ONLY FOR TABLE TRANSPORT ITSELF. USING THE ADJUSTABLE FOOT: Each table comes with four adjustable feet.
Maintenance and Care Please make sure your table is serviced yearly to ensure your table functions to its maximum capability. Lubrication of pivot points and moving points on the table frame must be done regularly. Electrically powered tables are equipped with a long-running, maintenance-free electric motor. Should any problems occur with this unit, please contact us. HOW TO CARE FOR YOUR UPHOLSTERY FABRIC Here are some steps to protect the table’s upholstery and ensure the longevity of the product.
Limited Warranty 1. A dirCorp (the company) warrants to the purchaser that the product will be free from defects in workmanship and materials for a period of three (3) year from the date of purchase. 2. These warranties are not assignable or transferable to any other person. 3.
Disclaimer By purchasing products from AdirCorp, user agrees as follows: TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE PRODUCTS AND INFORMATION ON THIS SITE IS PROVIDED “AS IS” AND WITH ALL FAULTS AND ALPINE INDUSTRIES.
ADI903-01 27 Selvage Street • Irvington, NJ • 07111 • © 2020 AdirCorp adircorp.
