Specifications

22 Description of Parts
Synchronizing Signal Output Terminal
The following signal is provided as a synchronizing signal for other
devices.
The synchronizing signal is output regardless of the MIX, MODU or DC
polarity selector keys or the VOLTAGE setting.
For example, even when the DC key is pressed and no pulse is output,
the END and DELAY pulses are output according to stimulation waveform
setup.
Output impedance: approx. 1 kilohm
Amplitude: approx. +5 V
Pulse duration: approx. 500 µs
STOP
INPUT
MODUMIX
MAIN
START
MAIN KEY
START
EXT
TRIG
EXT
TRIG
SPEAKER
to PC
OFF ON
OUTPUT
INTERVALDELAY
MAIN
INTERVAL
SET CYCLES
END
TRAIN
END
76
"
Name
Main interval output terminal
(MAIN INTERVAL)
Set cycle end signal output
(SET CYCLES END)
External trigger output terminal
(EXT TRIG)
Function
Generates a pulse that is synchronized with the MAIN INTERVAL trigger signal.
Generates a pulse that is synchronized with the last MAIN INTERVAL repeat
pulse. When CYCLES is set to 005 and MAIN INTERVAL is started, the pulse
is output at the fifth main interval.
[Fig.25]
Generates a pulse that is synchronized with the trigger signal created by the
external trigger signal.
A
B C
DEFG
[Fig.24]