User`s guide

APDCAM User’s Guide
Page 10/32
bination with the internal trigger mode, as APDCAM can trigger itself on the incoming
light signal. The camera can also produce an output trigger when the output is started.
In the standard setup the data acquisition system timing is based on in internal quartz
oscillator. However, if needed this can be replaced by an external clock signal to provide
strictly synchronous operation between several cameras or other devices.
2.10. Controls and indicators
APDCAM has several indicator LEDs and input-output connectors mounted on its back-
plate. Their function is described in Table 3. The photo of the backplate where these units
are mounted is shown in Figure 3.
Figure 3. Photo of the backplate of APDCAM with the controls, connectors and
indicators.