Instruction manual

10 GB Communication

Version

1.0

& Control Card Instruction Manual

1 Introduction

The 10 GB Communication and Control Card (10 GB C&C Card)

controls timing of all ADC Boards in the system, collects data from the serial

LVDS inputs, forms UDP packets and sends them to the DAQ PC on the 10

Gbit Ethernet XFP output line. Additionally it provides a parallel data

interface (PDI) for programming both the ADC Boards and the APDCAM

control card. Data to/from the parallel port is also transmitted in UDP

packets to/from the DAQ PC.

2 Features

 Single 3.3 V power supply

 10 GB Ethernet interface with XFP connector

 Separated 10Base-T and 100Base-TX management Ethernet interface

with RJ45 connector

 8 serial high-speed LVDS inputs

 4 UDP Data Stream outputs

 On–board 256-Mbit SDRAM

 Easy to program via UDP/IP or HTTP

 Integrated WEB server (option)

 8-bit instruction set (Digital Data Transmission over IP v3 – DDToIPv3)

 Protocols: ICMP ping, ARP, DHCP, UDP, TCP, HTTP

 Programmable ARP Report advertisement

 Status and overflow LED port

 Serial Communication Bus (SCB)

 Parallel Data Interface (PDI)

 External IO and Control ports

 Low power consumption, high reliability, long life time