Instruction manual

17
10 GB Communication
Version
1.0
3
& Control Card Instruction Manual
4.4 UDP Streamer
The UDP Streamer collects data from the serial LVDS inputs (Connector
S1..S4), forms UDP packets and sends them on the 10 Gbit Ethernet XFP
output line. The card has four independent UDP Streamer modules. The input
SATA connectors have 7 pins of which two pairs are used for fast LVDS
connections. LVDS lines transmit two stream signals, the rest is ground.
Standard computer SATA cable can be used to interconnect the ADC Board
II. with the 10 GB C&C Card.
Figure 5. UDP Streamer
The IP stream properties (MAC Address, IP Address, UDP data length)
can be set using the SETUDPSTREAM or the SETMULTICASTUDPSTREAM
instructions. The streamer supports jumbo frames up to 8k data length. The
UDP streams can be started or stopped using the SETSTREAMCONTROL
instruction.