User Manual
Table Of Contents
- 一、Overview
- 二、Thanks and Commitment
- 三、What is 3D Printer?
- 四、Printing
- 4.1ADIMLab-gantryArchitecture：
- 4.2Assembly and wiring
- （Please reference SD card file contents“2.Assembly and debugging tutorial”“HCmaker7Assembly instruction”1~2）
- 4.3 First time test the maker7
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”3）
- 4.3.1 Home test：
- 4.3.2Heating test：
- 4.4First time prepare printing:
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”4）
- 4.4.1XaxisHeight calibration：
- 4.4.2Leveling Heating Platform：
- 4.4.3 First time test the maker7：
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”5）
- (1)“Info screen” Press the knob，Rotate select“Print from SD”,Click OK：
- 五、Slice software installation and configuration
- 9 Support and service
8
way is to download from the website, which allows registered users to
upload 3D models of their own design.
(3) 3D Scanner
Scanning the object is an alternative method of 3D modeling. 3D
scanners to digitize items, collected its geometric data, then save it as a
file stored on your computer. Install the appropriate App on your mobile
device can be realized 3D scanning.
3.3 Slice output 3D model
Slice software can translate 3D models into G-code that 3D printer can
read. Slice software ADIMLab-gantry used is the most common type of
Cura, Repetier-Host (PS:Cura is quick and easy Slice software with fast
speed, short printing time and easy tooperate; Repetier-Host as a fine
slice software, requires many kinds of setting about the parameters,
representing more suitable for fine print, it needs to have a certain
understanding, it is a good software to adjust the fine print).
ADIMLab-gantry by dividing into a 3D model of a plurality of layers in
the form of g-code file output format of thisfile can be read by
ADIMLab-gantry. Files can be in the form of a USB cable, SD card, then
transferred to ADIMLab-gantry for printing operation.
四、Printing