User Manual
Table Of Contents
- 一、Overview
- 二、Thanks and Commitment
- 三、What is 3D Printer?
- 四、Printing
- 4.1ADIMLab-gantryArchitecture：
- 4.2Assembly and wiring
- （Please reference SD card file contents“2.Assembly and debugging tutorial”“HCmaker7Assembly instruction”1~2）
- 4.3 First time test the maker7
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”3）
- 4.3.1 Home test：
- 4.3.2Heating test：
- 4.4First time prepare printing:
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”4）
- 4.4.1XaxisHeight calibration：
- 4.4.2Leveling Heating Platform：
- 4.4.3 First time test the maker7：
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”5）
- (1)“Info screen” Press the knob，Rotate select“Print from SD”,Click OK：
- 五、Slice software installation and configuration
- 9 Support and service
7
三、What is 3D Printer?
In short, 3D printers are used to three-dimensional computer model into
real objects can be touched. The most common 3D printing technology is
called FDM (Fused Deposition Modeling), namely melting precipitation
manufacturing technology, ADIMLab-gantry belong to this one. The way
it works is melted on the printing platform supplies plastic called high
temperature. After cooling supplies curing, this process occurs at the
instant it from the print head is pushed out . Three-dimensional objects
layer by layer is superposed by supplies formed.
3.1 3D printing steps
3D printing involves three steps:
1) 3D modeling;
2) Slice and output 3D models;
3) Printing;
3.2 3D Modeling
(1)Self-designed 3D models
You can use the powerful 3D graphics software design 3D models,
such as AutoCAD, SolidWorks, Pro-E and other 3D graphics software,
the modeling method is applicable to professional design engineers,
mapping software or above a certain understanding of the user.
(2)Downloaded from the network
Currently available 3D models of the most popular and most convenient