User Manual
Table Of Contents
- 一、Overview
- 二、Thanks and Commitment
- 三、What is 3D Printer?
- 四、Printing
- 4.1ADIMLab-gantryArchitecture：
- 4.2Assembly and wiring
- （Please reference SD card file contents“2.Assembly and debugging tutorial”“HCmaker7Assembly instruction”1~2）
- 4.3 First time test the maker7
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”3）
- 4.3.1 Home test：
- 4.3.2Heating test：
- 4.4First time prepare printing:
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”4）
- 4.4.1XaxisHeight calibration：
- 4.4.2Leveling Heating Platform：
- 4.4.3 First time test the maker7：
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”5）
- (1)“Info screen” Press the knob，Rotate select“Print from SD”,Click OK：
- 五、Slice software installation and configuration
- 9 Support and service
49
9 Support and service
Our all the staff will by your side all the time and we are happy to solve
any problems you encountered in the use of ADIMLab-gantry process. If
you can't find the answer from the user’s guide or technical card, you can
enter into our official website to search for the solution, by the way, you
can contact us by phone or facebook group. You can contact the
maintenance team of the buildup team on Monday through Friday from
8:30 a.m. to 6:00 p.m. by Skype(ADIMLab 3D Printer) and facebook to
solve the problem for you. If you happen to contact us at work hours, we
will give you feedback at the first day of
the next working day, and we will be very sorry for the inconvenience.
Technical data:
1. Control software Repetier-Host installation and introduction
2. Full resolution liquid crystal display
3. Analysis of common problems FAQ
4. Slice resolution
5. Routine maintenance and maintenance of machines
The end
Youtube video：
Our channel: ADIMLab 3D Printer