User Manual
Table Of Contents
- 一、Overview
- 二、Thanks and Commitment
- 三、What is 3D Printer?
- 四、Printing
- 4.1ADIMLab-gantryArchitecture：
- 4.2Assembly and wiring
- （Please reference SD card file contents“2.Assembly and debugging tutorial”“HCmaker7Assembly instruction”1~2）
- 4.3 First time test the maker7
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”3）
- 4.3.1 Home test：
- 4.3.2Heating test：
- 4.4First time prepare printing:
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”4）
- 4.4.1XaxisHeight calibration：
- 4.4.2Leveling Heating Platform：
- 4.4.3 First time test the maker7：
- （Please reference SD card file contents“2.Assembly and debugging”“HCmaker7Assembly instruction”5）
- (1)“Info screen” Press the knob，Rotate select“Print from SD”,Click OK：
- 五、Slice software installation and configuration
- 9 Support and service
10
1.Frame 2.Towline 3. Extruder 4.Slideron the right side of the Z
axis 5.Nozzle 6.The print platform 7.Z-motor2 8.Foot
pad9.Slideron the left side of the Z axis 10.X-endstop 11.Cooling
fan12.Y axis the wheel stand 13.Z-endstop 14. Z-motor1 15.Y
axis pulley 16.X-motor 17.Z-endstop mounting plate 18.Z
-screw rod 19.Z axis screw 20.Coupling 21.Y-motor