User Guide

3.3 Slice output 3D model
Slice software can translate 3D models into G-code that 3D printer can read.
Slice software HCmaker 7 used is the most common type of Cura, Repetier-Host (PS:
Cura is quick and easy Slice software with fast speed, short printing time and easy to
operate; Repetier-Host as a fine slice software, requires many kinds of setting about the
parameters, representing more suitable for fine print, it needs to have a certain
understanding, it is a good software to adjust the fine print). HCmaker 7 by dividing
into a 3D model of a plurality of layers in the form of g-code file output format of this
file can be read by HCmaker 7. Files can be in the form of a USB cable, SD card, then
transferred to HCmaker 7 for printing operation.