User Guide

Ⅰ. Overview
Thank you for your support of our company's products, the guidelines only apply to
HCmaker 7 3D printer. This guide is based on Win7 operating system。
Chapter 1: Introduction of architecture, settings, and other preparatory work
Chapter 2: Introduction of software and printing step
Chapter 3: Introduction of actual printing operation and the print methods
Chapter 4: Technical support and guidance
Please read carefully before using the printer HCmaker 7 as following:
* Before you run the printer, please ensure it’s grounded to protect the printer from
electrostatic interference.
* When doing maintenance for the printer, please turn off the power and unplug the
power cord.
* Do not leave the printer running in the absence of probation conditions.
* Do not touch the nozzle under heating , and above 60 ℃ print platform。
* Some printing supplies at high temperatures melt will produce a slight odor, please
use the printer in a well-ventilated conditions.
* First adjust the machine before printing platform parallel with the print nozzles to
prevent nozzle rub internet.
* Place the printer on a flat solid platform
A total overview Thank you for your support of our company's products. HCmaker 7
model 3D printer.