User Guide

Preheat to a specified temperature (e.g., 200℃), Follow the steps below to replace
supplies
Ⅵ.Support and service
Our all the staff will by your side all the time and we are happy to solve any
problems you encountered in the use of HCmaker 7 process. If you can't find the
answer from the user’s guide or technical card, you can enter into our official website
to search for the solution,by the way,you can contact us by phone or QQ group.
You can contact the maintenance team of the build up team on Monday through
Friday from 8:30 a.m. to 6:00 p.m. by phone and QQ to solve the problem for you. If
you happen to contact us at work hours, we will give you feedback at the first day of
the next working day, and we will be very sorry for the inconvenience.
Technical data:
1. Control software Repetier-Host installation and introduction
2. Full resolution liquid crystal display
3. Analysis of common problems FAQ
4. Slice resolution
5. Routine maintenance and maintenance of machines