User Guide

Select the model and click Print
5）Print complete, remove the model.
After the print is finished, after the platform is cooled, the model is removed (the
lateral force is easier to take off the model), and the observation and measurement are
carried out.
6）Replacement of consumablesPlease refer to the following steps to standardize the
operation
Note: need to be heated to the melting temperature of the printer supplies replacement
supplies (such as PLA need to be heated to 200 DEG C), and then press the lever
supplies downward after a period of pull out, prevent the residual material supplies
card to the channel, and print out material inserting effect. The ejector pin of the
machine is used for dredging the runner.