Specification Sheet

Slic3r Setting (Slicing Software)

1. Overview

Slic3r is a tool for 3D printer that converts digital 3d model to command

the understanding of a 3d printer. This model is converted into a

horizontal layer and generates the right path to fill. This manual will

provide guidance on how to install, configure, and use Slic3r in order to

produce good printing.

2. Slicing Interface of Repetier-Hose

PAGE 1
Slic3r Setting (Slicing Software) 1. Overview Slic3r is a tool for 3D printer that converts digital 3d model to command the understanding of a 3d printer. This model is converted into a horizontal layer and generates the right path to fill. This manual will provide guidance on how to install, configure, and use Slic3r in order to produce good printing. 2.
PAGE 2
3.
PAGE 3
Infilling setting Skirt and brim setting Support Supplies Setting
PAGE 4
Speed setting Multiple Extruders setting Advanced
PAGE 5
Output Options Save every step of setting 3）Filament Settings Filament
PAGE 6
Cooling Save every step of setting
PAGE 7
4）Printer Setting General Custom G-code
PAGE 8
Extruder Save every step of setting
PAGE 9
5）Choose Slicing Software you need 3. Summary There are many setting for Slicing software, what we actually need to adjust the parameters is not that much, in the case of print and reliable, you can raise the printing speed according to your own needs so that it can shorten the printing time. It is worth noting that the several key parameters: the nozzle diameter, the diameter of consumables, print size, speed, temperature, platform.