Application Guide

Skype and Q&A Face book group: ADIMLab 3D Printer
Contact: [e-mail] Skype: ADIMLab 3D Printer facebook group: ADIMLab 3D Printer
③ If the hot end is clogged, the extruder won’t extrude the filament, we
need to
2. Unloading the filament：
（1）Preheat：
①“Info screen”press down the rotate button，and select“Prepare”,click
to confirm：
②In the submenu, rotate to selection “Preheat PLA”，and click to
confirm：
④ In the submenu, rotate to selection “Preheat PLA”， and click
to confirm：