Instruction Manual

5
ADICOS X22-Melder 405-2010-003 EN21
STRUCTURE
3.2 Cable assignment
Wire Color Signal Limit value contact
1 black
Operating voltage
24 ... 40 V DC non-polarised
1 white
2 black Relay output X6 e
Alarm NO
1
2 white Relay output X6 a Alarm NO
1
3 black Relay output X7 a Fault NC
3 white Relay output X7 e Fault NC
4 black
M-Bus
max. 40 V non-polarised
4 white
1
with series resistor, standard 680 Ω
Analog signal option
Wire Color Signal Analog signal
5 black Analog signal - protected
against polarity reversal
4 ... 20 mA
6 black Analog signal - protected
against polarity reversal
0 ... 5 V
0 ... 10 V
5 white Analog signal 4 ... 20 mA
6 white Analog signal 0 V
Option Fire panel interface
Wire Color
Interface module
Siemens
FDnet
Bosch
LSNi
5 black Interface module A - in FDnet (+) LSN a in
5 white Interface module B - in FDnet-A (-) LSN b1 in
6 black Interface module A - out FDnet (+) LSN a out
6 white Interface module B - out FDnet-B (-) LSN b2 out
Option Auxiliary relay
Wire Color Auxiliary relay
5 black -
5 white
Normally open
6 black Normally closed
6 white Common