Specifications

Mode Dialog Selection 5-9
01 Aug 2000
Mode Dialog Selection
The Mode Dialog is primarily used to change the operating
mode of the Scalar 1000 for startup, shutdown, or diagnostic
operations.
Mode
is selected from the Main Menu by
following this procedure.
Step 1 If necessary, press the button until the Main
Menu appears.
The Main Menu appears with the selection indicator
positioned at Mode.
Step 2 Press the button.
The Mode Dialog appears. See Figure 5-3. The first line
of the Mode Dialog displays the current state.
Figure 5-3 Mode Dialog
To choose one of the selections, follow the steps.
Step 3 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Mode Online
Offline
Shutdown
State Ready
NotReady
Accept Y to accept changes
N to reject changes
Offline ....... Ready
>Online
Ready
Accept: N
Note
If Shutdown is
selected for the
Mode parameter,
Shutdown is
automatically
displayed for the
State parameter.