Specifications

Service Menu Selection 5-157
01 Aug 2000
Fiducial Test Dialog
When
Fiducial Test
is selected, the Fiducial Test Dialog
is displayed. See Figure 5-172. This option allows the operator
to test the scanner to determine if it is functioning properly.
Figure 5-172 Fiducial Test Dialog
Step 1 Press the button to select the current parameter
value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Test 1 will read the first storage
fiducial and display the found
edge coordinates.
2 will read the Insert/Eject
Station fiducial and display the
found edge coordinates.
Continue Y to continue running the test.
N to cancel the test.
Press the button to confirm the changes.
The value of the Loops parameter in the Fiducial
Test Dialog is supplied by the library firmware and
can not be changed. The Loop parameter indicates
how often the test has been run.
The value of the XCnt parameter in the Fiducial Test
Dialog is supplied by the library firmware and can
not be changed. The XCnt parameter indicates the x
edge position count in tenths of a mm.
The value of the YCnt parameter in the Fiducial Test
Dialog is supplied by the library firmware and can
Loops: 00 Test: 1
Xcnt: 000000
Ycnt: 000000
Continue: Y<