Specifications

Service Menu Selection 5-155
01 Aug 2000
Adjust Dialog
When
Adjust
is selected, the Adjust Dialog is displayed. See
Figure 5-170. This option positions the barcode scanner beam
over a specific location. This option is used by Customer
Engineer to adjust the beam. Refer to the
Scalar 1000
Maintenance Guide
for the step by step procedure to adjust the
scanner.
Figure 5-170 Adjust Dialog
Step 1 Press the button or the button to alter the
Y position parameter values.
Parameters Values
Y Position Indicates the returned vertical
position value of the scanner
DIAGS SCANNER ADJUST
Adjust scanner until
beam is level.
Y Position : 1002.0<