Specifications

5-150 Menus and Commands
600561-A
Press the button to confirm the changes.
Step 4 Repeat Step 3 for all of the parameter in the list.
If
Y
is selected for the Accept parameter value, the
Number of Elements Dialog appears. See Figure 5-165.
Otherwise, the changed parameters continue to display
but no action is taken.
Figure 5-165 Number of Elements Dialog
Step 5 Press the button to select the current
parameter default value and move to the next
parameter.
— or —
Press the button or the button to toggle
the parameter values.
Parameters Values
Get/Put Selects the number of
elements where the Get/Put
operation is applied
(0000 .. 0048 for all elements)
Accept Y to accept changes
N to reject changes
Press the button to confirm the changes.
Step 6 Repeat Step 5 for all of the parameter in the list.
If
Y
is selected for the Accept parameter value, the
Response Dialog appears. Refer to Figure 5-166 on page
5-151. Otherwise, the changed parameters continue to
display but no action is taken.
Number of Drives
to Get/Put : 0010<
Accept : N