Specifications

5-118 Menus and Commands
600561-A
Update Microcode Dialog
When
Update Microcode
is selected, the Update
Microcode Dialog is displayed. See Figure 5-129. This option
initiates a drive firmware update.
The operator must determine the location coordinate or
element address of the firmware update tape prior to
following this procedure.
Figure 5-129 Update Microcode Dialog
Step 1 Press the button to select the current
parameter default value and move to the next
parameter.
— or —
Press the button or the button to toggle
the Coordinate parameter values.
Parameters Values
Coord The first field indicates the
type of cell (I for I/E Station, D
for Drive, S for Storage cell)
The second field indicates the
module number which can be
modified if expansion
modules are present (1 .. 4)
The third field indicates the
storage cell section (1 .. 4),
drive bay (1 .. 2), or IE station
number
The fourth field indicates the
column of the section (A .. E),
drive port (A .. B) or IE station
Enter SOURCE
Coord: I 01 1< A 12
OR Element: 01193
Accept : N