Specifications

Utils Menu Selection 5-107
01 Aug 2000
Utils Menu Selection
The Utils Menu is primarily used to execute various Scalar
1000 utilities.
Utils
is selected from the Main Menu by
following this procedure.
Step 1 If necessary, press the button until the Main
Menu appears.
The main Menu appears with the indicator positioned at
Mode.
Step 2 Press the button or the button to position
the selection indicator at Utils.
Step 3 Press the button.
The Utils Menu appears. This menu offers two
selections. See Figure 5-117. The Utils Menu defaults to
the
Library
selection.
Figure 5-117 Utils Menu
To choose one of the two selections, follow the
steps.
Step 4 Press the button to select the Library Submenu.
— or —
Press the button or the button to select
Drives Submenu.
Press the button.
The selected menu appears. Refer to Library Submenu on
page 5-108 or Drives Submenu on page 5-117.
>
Library
Drives