Specifications

5-96 Menus and Commands
600561-A
Advanced Dialog
When
Advanced
is selected, the Advanced Dialog is
displayed. See Figure 5-109. This option enables or disables
the automatic configuration, calibration, and cartridge scan
when the library has power cycled.
If Auto Inventory is disabled, the element status is not
known until the host issues an Initialize Status command or
an Inventory is performed via the Operator Panel.
If Auto Inventory is enabled, an automatic cartridge
inventory is executed on each power cycle.
Any changes in the Operating Mode parameter value
should be made by authorized Service Personnel. The
default is set to 0.
Figure 5-109 Advanced Dialog
Step 1 Press the button to select the current
parameter value and move to the next parameter.
— or —
Press the button or the button to toggle
between the parameter values in the following list.
Parameters Values
Auto Teach Y to enable Auto Teach for
automatic configuration and
calibration on each power
cycle
N to disable Auto Teach on
each power cycle
Auto Inventory Y to enable Auto Inventory for
automatic cartridge scanning
inventory on each power cycle
N to disable Auto Inventory
on each power cycle
Auto Teach : Y<
Auto Inventory: N
Operating Mode: 0
Accept: N