Specifications

Setup Menu Selection 5-93
01 Aug 2000
RMU Submenu
The Scalar 1000 is equipped with a Remote Management Unit
(RMU) which allows web-based library management via the
Ethernet port. The RMU Submenu allows the administrator to
set the initial values of the RMU network parameters to allow
for remote access.
When
RMU
is selected, the RMU Submenu is displayed. See
Figure 5-106.
Figure 5-106 RMU Submenu
To choose one of the two selections, follow the
steps.
Step 1 Press the button to select the Name/DHCP
Dialog.
— or —
Press the button or the button to select the
IP Dialog.
Press the button.
The selected menu appears. Refer to Name/DHCP Dialog
on page 5-93 or IP Dialog on page 5-95.
Name/DHCP Dialog
When
Name/DHCP
is selected, the Name/DHCP Dialog is
displayed. See Figure 5-107 on page 5-94. Name/DHCP
allows the user to enable/disable Dynamic Host
Communication Protocol (DHCP) and to define the host name
for the RMU.
>Name/DHCP...
IP...